Post by anton on Nov 12, 2023 14:45:40 GMT 1
Hi to all,
I decided to start my first thread in this section to may also get guidance about the next steps for you.
Short Intro about me, I am Anton from Germany and I bought together with a friend a Ford Cargo 1012 tow truck from 1981 (Italien Vehicle / Papers).
The body of the truck is in very good condition, but there is a huge service delay. The truck was parked 2 years in while that time someone destroyed close to everything inside the cabin. So all of the Instruments are broken, the electric is damaged and parts are pulled out etc etc.
We somehow managed to get the engine running by directly powering the starter. So we move the truck yesterday 70 km to our place.
We already know that we need new parts for the steering. The track rod ends here very very bad. The shock absorbers for fron axle are broken as well.
The shift linkage is very bad.
We also planned to do:
All Break parts new.
All Oils new
All Filters new
Doing Service of the Engine (valve clearance etc)
Here starts our problems where we would be thankful for every help / guidance and tipps.
We have italien papers:
BJ: 1981
1) Ford DFBCAD 1012 CTG.N2
E) (VIN) SFACXXBCDCBR05686
F.2 13500 F.3 17000 (?)
I) 15.10.2001 (First EU papers?)
O.1 3500 (?)
P.1) 6224 (Hubraum) P.2 87,58 (kW) P.3 GASOL
P.5 7AA (?)
U.1 90 (max Speed?) U.2 2950 (?)
Looking around in the internet we do not find the Cargo 1012 with 87, 87,5 or 88kw.
In same lists of aftermarked part distributors like MANN Filters we found a 89kw but also 6220 instead of 6224 ccm like in our papers.
Because of this we do not know how to find the right parts, how to look for, and how to identify our model because may also the papers are wrong.
in general out of Germany to doing such a project with the old Ford trucks seems to be challenge.
Thanks to everybody in advance.
BR Anton
I decided to start my first thread in this section to may also get guidance about the next steps for you.
Short Intro about me, I am Anton from Germany and I bought together with a friend a Ford Cargo 1012 tow truck from 1981 (Italien Vehicle / Papers).
The body of the truck is in very good condition, but there is a huge service delay. The truck was parked 2 years in while that time someone destroyed close to everything inside the cabin. So all of the Instruments are broken, the electric is damaged and parts are pulled out etc etc.
We somehow managed to get the engine running by directly powering the starter. So we move the truck yesterday 70 km to our place.
We already know that we need new parts for the steering. The track rod ends here very very bad. The shock absorbers for fron axle are broken as well.
The shift linkage is very bad.
We also planned to do:
All Break parts new.
All Oils new
All Filters new
Doing Service of the Engine (valve clearance etc)
Here starts our problems where we would be thankful for every help / guidance and tipps.
We have italien papers:
BJ: 1981
1) Ford DFBCAD 1012 CTG.N2
E) (VIN) SFACXXBCDCBR05686
F.2 13500 F.3 17000 (?)
I) 15.10.2001 (First EU papers?)
O.1 3500 (?)
P.1) 6224 (Hubraum) P.2 87,58 (kW) P.3 GASOL
P.5 7AA (?)
U.1 90 (max Speed?) U.2 2950 (?)
Looking around in the internet we do not find the Cargo 1012 with 87, 87,5 or 88kw.
In same lists of aftermarked part distributors like MANN Filters we found a 89kw but also 6220 instead of 6224 ccm like in our papers.
Because of this we do not know how to find the right parts, how to look for, and how to identify our model because may also the papers are wrong.
in general out of Germany to doing such a project with the old Ford trucks seems to be challenge.
Thanks to everybody in advance.
BR Anton