|
Post by rizlajon on Feb 24, 2018 19:15:56 GMT 1
hi all. I have a cargo 0813 my problem is when I turn on lights I have no dipped beam I have side lights and main beam. I have checked the bulbs and even replaced them ive checked fuses all ok ive even swopped the light switch but still nothing. as anyone had this problem or no how to fix please I have mot coming up and really need to sort it. thanks
|
|
robyorks
Cargo 7.5 Ton Learner
Posts: 94
|
Post by robyorks on Mar 6, 2018 11:34:09 GMT 1
Sounds like a job for an auto electrician (I'm rubbish with electrics!)
|
|
|
Post by fredtransit on Mar 6, 2018 12:55:25 GMT 1
I would have said the light switch. If all else fails, to get through the test, you could wire the lights to a switch on the dash.
|
|
|
Post by alfiebeard on Mar 17, 2018 20:15:07 GMT 1
Hi if you checked all the Relays on the fuseboard and still not found the problem, then remove the fuse board from the passenger side (below the glovebox) and take it out of its holder and you will probably find that the printed circuit has burnt and the soldered joints need resoldered. the fuse board on Cargos have been the cause of many electrical faults, I did post somewhere about them on here a few years ago.
Hope this helps.
Alf
|
|
|
Post by glbr2010 on Aug 20, 2018 16:18:49 GMT 1
hi all. I have a cargo 0813 my problem is when I turn on lights I have no dipped beam I have side lights and main beam. I have checked the bulbs and even replaced them ive checked fuses all ok ive even swopped the light switch but still nothing. as anyone had this problem or no how to fix please I have mot coming up and really need to sort it. thanks hi .i have had the same problem ...give your fuse box a wack on the right end corner ...may have loose connections ..that got mine working
|
|